Phantom 3

Phantom is a progression of unmanned airborne vehicles (UAVs) created by the Chinese organization DJI. These non-military quadcopters or automatons are expected for recreational and business airborne cinematography and photography. The body casings are made of composite materials. Impetus is given by four two-cutting edge propellers driven by four electric engines mounted at the closures of the x-molded body.

The Phantom 3, discharged in April 2015, includes worked in lightbridge downlink, that gives the controller a greatest scope of 2,000 meters (1.25 miles), and the visual situating framework, that permits the Phantom 3 to better keep up its position at lower elevations and even inside where GPS is powerless or distracted.

The controller highlights a plastic front plate and does not have a HDMI out.

There are three models of the Phantom 3:

Proficient: highlights 4K video recording and a 100 watt charger. 

Propelled: highlights 2.7K video recording and a 57W charger. 

Standard: discharge in August 2015, it is less expensive and elements 2.7k video recording.

In spite of the fact that the business utilization of automatons is still in a legitimate hazy area, a few fragments of industry are interested in its use and right now seeing numerous advantages. Among their numerous applications, the most surely understood are automaton reporting, typhoon chasing, 3-D mapping of scene, nature assurance, cultivating, and inquiry and safeguard. Automatons are being utilized as a part of amusement and in addition in business. The Fox Broadcasting Company utilized Phantom 2 Vision+ quadcopters to advance the show 24 amid the San Diego Comic-Con International 2014.

Built-in

NAZA-M Autopilot System

(Refer to NAZA-M manual for details)

GPS & Compass Module

R/C Receiver

Power System for Flight

LED Indicator

USB Interface(in the Battery Compartment)

Function

ATTI./GPS ATTI. Mode

Intelligent Orientation Control

Enhanced Fail-Safe

Low-voltage Alarm

Camera Frame (For Gopro)

Please mount the Camera and Camera Frame if necessary.

（1）Mount the Camera to the Camera Frame

（2）Mount the Camera and Camera Frame to the aircraft

Make sure to use the dedicated cross screws of the type M3.0*6, since an over long screw will puncture the battery by passing through the battery compartment and could lead to explosion or fire.

Charger

AC Input: 100-240V

Charge Circuit：1A/2A/3A

Current Drain for Balancing: 200mA

Circuit Power：20W (@2A)

Battery：LiPo(2200MAH-20C－11.1V)

Working Frequency: 2.4GHz ISM

Control Channel Numbers of TX: 6

Communication Distance: 300m

Receiver Sensitivity(1%PER): ＞-93dBm

Power Consumption of TX: ＜20dBm

Working Current/Voltage: 52 mA@6V

AA Battery (5#): 4 Required